This article helps to easily understand the steps to install LSquared application on a LG Web OS TV using the URL.
Installation with URL
1. Turn on the LG WebOS TV.
2. Press the settings button on the remote.
3. Select the “SI Server Setting” option in the “EZ Setting” menu.
4. Select the “SI Server Setting” again.
5. On the SI Server Setting menu, set the following fields with the values provided.
A. Fully Qualified Domain Name: On
B. URL: https://hub.lsquared.com/cr/wslide/com.lg.app.signage.ipk
Note: URL field depends on the environment you want to deploy the TV (Refer to the additional information at the bottom of this guide)
C. Application Launch Mode: Local
D. Application Type: IPK
E. Local Application Upgrade: REMOTE
F. Auto Set: Off
6. When you will click on the "REMOTE" button in the above menu, it will ask for a
confirmation. Press the "Confirm" button.
7. Once the app is installed successfully, it will show you a confirmation message. Press the
"OK" button.
8. Reboot TV.
Additional Information:
In order to determine what environment link is needed, you will need to:
log into the L Squared
Look at your browser's URL. If your URL starts with "us.Lsquared.com", please download the US HUB Link below.
If your URL starts with "Hub.lsquared.com" please download the CA Hub link before.
- https://hub.lsquared.com/cr/wslide/com.lg.app.signage.ipk - CA HUB
- https://us.lsquared.com/lsquared-hub/cr/wslide/com.lg.app.signage.ipk - US HUB
Note: If your browser's URL is not listed here, please reach out to our support team for more information.